|
Wireless Acc |
| |
WAI-102PA. |
The AirLive
WAI-102PA is an ultra compact 10dBi wireless
antenna designed for indoor point to point
use. The directional characteristic allow the
antenna to focus its signal for longer
distance. It can deliver up to 4 times the
distance of the standard 2dBi antenna. The
antenna is equipped with pigtail cable of male
R-SMA connector to connect with your AP or PCI
WLAN card directly. |
|
|
| |
WPA-2400IG |
Not
getting enough distance and coverage with your
WLAN equipment? OvisLink introduces the
simplest and most powerful solution to get the
desirable wireless distance you need.
|
|
|
| |
RG-316-SS-30 |
| The
RG-316SS is a thin cable for connection between
indoor AP and indoor antenna. The cable has a
male reversed SMA connector on one side to
connect with AP and female reversed SMA
connector on the other side to connect with
indoor antenna. A connector typically has 0.3
dBi of signal loss, the combined signal loss of
the 2 connectors and 30cm cable is about 1dBi.
Therefore, a 10dBi patch antenna connected to AP
using this cable still yield four times the
signal strength of the standard 2dBi antenna. |
|
|
| |
WPA-2400EG |
The
WPA-2400EG is a complete set of weather-proof
2.4Ghz power booster that amplify the signal of
any 802.11g device for up to 30dBm(1Watt) in
power. That means your AP or wireless router can
reach over 20 kilometers in open space distance
using a 18dBi antenna. Best of all, the booster
is bi-directional to increase both the output
power and the receiving sensitivity. Several
models with different output level (100mW,
200mW, 500mW, 1W) are available to fit your
operating environment. |
|
|
| WAE_085GP |
| The
WAE-085GP is a 8.5dBi wireless antenna
constructed of weather resistant material. The
omni-directional(360 degree horizontal) coverage
makes the antenna ideal for outdoor AP use. The
antenna is equipped with female N-Type connector
for use with RG-213 cable. Please note the
vertical coverage is only 15 degree; therefore,
the remote object should at similar altitude as
the antenna. For building to building
application, please choose the outdoor patch
antenna. |
|
|
| |
RG316-SS-30-2 |
The RG-316SS is a
thin cable for connection between indoor AP and
indoor antenna. The cable has a male reversed
SMA connector on one side to connect with AP and
female reversed SMA connector on the other side
to connect with indoor antenna. A connector
typically has 0.3 dBi of signal loss, the
combined signal loss of the 2 connectors and
30cm cable is about 1dBi. Therefore, a 10dBi
patch antenna connected to AP using this cable
still yield four times the signal strength of
the standard 2dBi antenna. |
|
|
| WAI_050 |
| The
WAI-050 is a 5dBi antenna wireless antenna that
connects directly to AP or Card's Reversed SMA
connector. Standard AP antennas are usually in
the 2dBi to 3dBi range; therefore, the WAI-050
can effectively double the signal strength of
most wireless products. The Dipole antenna is
omni-directional which has a 360 degree
coverage. |
|
|
| PoE100Family |
| For
applications that require user to put a network
device (such as AP) in a place where there is no
electrical outlet available, the Power over
Ethernet is the best solution. Power over
Ethernet allows both data and electricity to be
transmitted over a Cat.5 UTP/STP cable at up to
100 meter of distance. This allow electronic
devices to be placed in the outdoor or difficult
to reach places, while utilizing the power
source and the Ethernet network indoor. |
|
|
| RG_316_SNF_30 |
| The
RG-316SNF is the adapter cable for connection
between indoor AP and RG213 cable. The cable
has a male reversed SMA connector on one side to
connect with AP and female N-Type connector on
the other side to connect with RG213 cable (or
any outdoor cable). A connector typically has
0.3 dBi of signal loss, the combined signal loss
of the 2 connectors and 30cm cable is about
1dBi. This cable will use in conjunction with
RG-213NN for extended connection between a
indoor AP and a outdoor antenna. |
|
|
